How to Install Centerfire HD Series Consumables
Standard Installation –
- Install insulator cap over neck.
- Trim liner to between 5/8″ and 3/4″ beyond neck thread.
- Torque diffuser onto neck to approximately 12 ft.-lbs.
- Insert tip into gas diffuser.
- Thread nozzle body onto gas diffuser / tip, and tighten firmly by hand.
- Thread nozzle cone onto nozzle body, and tighten firmly by hand.
Installation with Conversion Adaptor –
- Install conversion adaptor.
- Install insulator cap over conversion adaptor.
- Trim liner to between 5/8″ and 3/4″ beyond adaptor thread.
- Torque diffuser onto adaptor to approximately 12 ft.-lbs.
- Insert tip into gas diffuser.
- Thread nozzle body onto gas diffuser / tip, and tighten firmly by hand.
- Thread nozzle cone onto nozzle body, and tighten firmly by hand.
![How to install Centerfire consumables](https://sp-ao.shortpixel.ai/client/to_webp,q_glossy,ret_img,w_1024,h_341/https://www.tregaskiss.com/wp-content/uploads/2020/11/centerfire_hd_consumables_installation_instructions-1024x341.png)
![How to install Centerfire consumables, helpful tip](https://sp-ao.shortpixel.ai/client/to_webp,q_glossy,ret_img,w_165,h_83/https://www.tregaskiss.com/wp-content/uploads/2020/07/centerfire_consumables_installation_instructions_helpful_hint.jpg)
Helpful Tip: The base of every Centerfire™ Gas Diffuser has a 3/4″ diameter, and can be used as a liner trimming guide.